The GLM10 screws into the service port of an exposure chamber, where the built-in UV sensing probe monitors the lamp.
Designed to display 0 - 100% intensity values, the GLM10 is easily calibrated to 100% when a new lamp is installed. As the lamp ages and the output drops, the display accurately shows the intensity level as a percentage of initial lamp intensity.
A preset threshold is used to determine when the threshold is reached, both the fault light and internal relay are activated for automatic valve control or remote alarm, ensuring a continuous supply of safe drinking water.
|
Features
> Continuous Monitoring
> Easy One-Step Calibration
> Large LED Display
> Fault Indicator
> Automatic Control of External AC Powered Devices
An Eye to the Future
As new water regulations are implemented, Solar Light also offers several NIST traceable germicidal radiometer and detector solutions to meet new regulatory standards and analytical measurement requirements. Please contact us for details
|
Specifications
Power requirements 115VAC 60Hz
Display resolution 1%
Range 0 - 100%
Relay contacts
10A 125VAC Form C Factory set, normally closed or normally open
Readout
Red LED Display, 0.56" high
Monitor port 1" FPT (Other sizes available)
Weight 1.5 lbs. (680 grams)
Dimensions
4 5/8" X 3 1/8" X 5" (11.7 X 7.9 X 12.7 cm)
Pressure 150 PSI / 1034 kPa
Wavelength response 240 - 275 nm
|